This document is an instruction manual for the Signature S22002 Steam Generator Iron, a 2300W appliance designed for domestic use. It provides essential information regarding product safety, technical specifications, usage instructions, and warranty details.
Function Description
The Signature S22002 is a steam generator iron designed to efficiently remove wrinkles from various fabrics. It features a base unit that houses the water reservoir and steam generation system, and a separate iron unit with a soleplate, steam button, and temperature control. The appliance generates steam which is then delivered to the iron for effective pressing. It is suitable for ironing a wide range of textiles, from delicate synthetics to robust cotton and linen, with adjustable temperature settings to match fabric requirements. The steam generator design allows for continuous steam output, which is generally more powerful and consistent than traditional steam irons, making ironing quicker and more effective.
Important Technical Specifications
- Description: Steam Generator Iron
- Model: S22002
- Rated Voltage: 220-240V~50/60Hz
- Power Consumption: 2300 Watts
- Water Capacity: 0.5 litres (500ml) for the tank.
- Safety Features: Earthed appliance, non-rewireable mains plug (ASTA approved), cord grip, safety cap for the water tank.
- Controls: Temperature control dial on the iron, steam button on the iron, Iron On/Off switch on the base, Steam On/Off switch on the base.
- Indicators: Iron ready light, Steam ready light.
- Compliance: Conforms to 2014/30/EU (Electromagnetic Compatibility Directive), 2014/35/EU (Low Voltage Directive), and 2011/65/EU (Restriction of Hazardous Substances Directive).
Usage Features
The iron is designed for ease of use with several features to enhance the ironing experience:
- Temperature Control: A dial on the iron allows users to select the appropriate temperature for different fabric types, indicated by symbols for synthetic, silk, wool, cotton, and linen. A textile chart is provided to guide users on the correct temperature knob position for various materials, including Acrylic, Modacryl, Polypropylene, Polyurethane, Acetate, Triacetate, Metalized, Cupro, Polyamide (Nylon), Polyester, Modal, Viscose (Rayon), Silk, Wools, Cotton, and Linen.
- Steam Output: The steam button on the iron activates the steam function. The steam generator provides a high steam output, which is particularly effective for stubborn wrinkles. The manual notes that it may take up to 30 seconds for steam to start coming out initially.
- Indicator Lights: An "Iron ready light" and a "Steam ready light" on the base unit, along with an "Iron ready light" on the iron itself, indicate when the appliance has reached the selected temperature and is ready for use. The iron's light may cycle on and off during use, which is normal and indicates the thermostat is regulating temperature.
- Safety Cap: The water tank is secured with a safety cap, which must be removed for filling and emptying.
- First Use Preparation: Before first use, users are instructed to remove all packaging, stickers, and protective foil from the soleplate. The appliance should be located on a stable, level, and heat-resistant surface.
- Filling the Water Tank: The tank should be filled with 0.5 litres (500ml) of water using a funnel, ensuring the unit is cool and unplugged before filling.
- Ironing Tips:
- Always check ironing instructions on garment labels.
- Start ironing articles requiring the lowest temperature first, as the iron heats up faster than it cools down.
- For fabrics with mixed fibres, select the lowest ironing temperature required for any of the fibres.
- Iron silk and other fabrics prone to shininess on the inner side.
- Avoid spraying water directly on silk or delicate fabrics to prevent staining.
- Troubleshooting: A dedicated section addresses common issues such as no steam output (solution: fill water tank, press and hold steam trigger), iron leaving a shine or imprint (solution: ensure even ironing surface, avoid seams/folds), wet ironing board cover or water droplets (solution: steam condensation after long session), and too much steam (solution: default optimal temp setting provides high steam output).
Maintenance Features
The manual provides guidance on basic maintenance and safety practices:
- Cleaning: The manual advises against immersing electrical parts like motor units or plugs in water. Specific cleaning instructions are referenced but not detailed in the provided excerpts, suggesting a dedicated cleaning section elsewhere in the full manual.
- Storage: After use, all switches should be in the off position. The iron should always be turned to "min" before plugging or unplugging.
- Safety Precautions:
- Always ensure the appliance is used on a stable, level, and heat-resistant surface.
- Do not immerse cords, plugs, or any part of the appliance in water.
- Do not leave the appliance unattended when operating or connected to the mains.
- Disconnect the iron from the electrical outlet when filling with water, emptying, or not in use.
- Do not carry the appliance by the power cord.
- Do not pull the plug out by the cord.
- Do not use extension cords.
- Do not use the appliance outdoors.
- Be cautious of hot metal parts, hot water, or steam to prevent burns.
- The iron is designed to rest on its soleplate; do not place it on an unprotected surface.
- In case of damage or fault, stop using the appliance immediately and seek advice from customer support.
- Supervision is required when used by or near children and pets. Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, can use the appliance if supervised and instructed on safe use and hazards. Children should not play with the appliance.
- Disposal: The product must not be disposed of with domestic rubbish. It should be disposed of separately as old electrical and electronic appliances. Information on recycling in the UK and Ireland is provided, directing users to relevant websites and civic amenity sites.
Warranty and Support
The product comes with a 12-month guarantee from the date of original purchase, covering faulty materials or workmanship. Refunds or replacements are at the retailer's discretion. Conditions for warranty include returning the product with proof of purchase, installation and use according to instructions, domestic use only, and exclusion of wear and tear, damage, misuse, or consumable parts. RK Wholesale LTD has limited liability for incidental or consequential loss or damage. The guarantee is valid only in the UK and Eire. An extended 1-year warranty is available upon online registration within 28 days of purchase at www.signaturebrand.co. Customer support is available via phone at +44 (0) 333 220 6062.
To Next Page
General