TP17 / TPM
- 2 - © SIKA • Ba_TP17-TPM_en • 01/2016
Table of contents page
0 About this operating manual ......................................................................................... 4
1 Device description ......................................................................................................... 5
1.1 Delivery, unpacking and accessories ......................................................................... 6
1.2 Intended use ................................................................................................................ 7
1.3 Warranty ...................................................................................................................... 7
1.4 Exclusion of liability .................................................................................................... 8
2 Safety Instructions ........................................................................................................ 8
2.1 Safety instructions for the application of calibration liquids ................................... 10
3 Construction and function ........................................................................................... 11
3.1 Construction .............................................................................................................. 11
3.2 Functions ................................................................................................................... 12
3.3 Data interface (S versions) ........................................................................................ 12
4 Commissioning and operation .................................................................................... 14
4.1 Operating conditions ................................................................................................. 14
4.2 Electrical connection ................................................................................................ 15
4.3 Preparation of the calibrator .................................................................................... 16
4.3.1 Dry block calibrator .............................................................................................. 17
4.3.2 Calibrator for infrared thermometer ................................................................... 18
4.3.3 Calibrator for surface temperature sensors ....................................................... 19
4.3.4 Micro bath calibrator ............................................................................................ 20
4.4 Switching on, cool down and switching off ............................................................... 24
4.5 Operating modes ....................................................................................................... 25
5 Operation ..................................................................................................................... 26
5.1 Control elements of the controller (controller type K32SK) .................................... 26
5.2 Calibration (calibration mode) .................................................................................. 27
5.2.1 Display of reference and set temperature ........................................................... 27
5.2.2 Display of temperature control ............................................................................ 27
5.2.3 Display of fan/ cooling control .............................................................................. 28
5.2.4 Display of heating / cooling capacity and operating duration .............................. 28
5.2.5 ConF menu ............................................................................................................ 28
5.3 Set a temporary set temperature (set point mode) .................................................. 29
5.4 Main menu ................................................................................................................. 30
5.4.1 Automatic control ................................................................................................. 32
5.4.2 Manual control ...................................................................................................... 33
5.4.3 Set point memory (S version) ............................................................................... 34
5.4.4 Gradient control / temperature profile (S version) .............................................. 35
To Next Page
Loading...
