SILENCE S02 LS - Ignition

MU_S02 LS_EN - S02 LS User Manual (V002) Page 27 of 62 Copyright© SILENCE Urban Ecomobility
5) Ignition
Switch positions:
a) “LOCK”: Handlebar lock
Turn the handlebar all the way to the left. Put the key in, push it in and turn to the left, to the "LOCK" position.
Now all the functions are blocked and the scooter movements are highly limited.
b) “OFF”: Shutdown / Unlocking the handlebar
All the functions are locked but the handlebar isn’t (the scooter can be moved). You can work on the scooter safely.
c) “ON”: On
All functions are ready to be used. The scooter is ready to be driven if you hold the MODE button pressed until “READY” appears on the speedometer and
the green drive light (D) comes on. In this position, the key cannot be removed.
d) “SHUT”: Guard closed
Insert the top slotted end of the hey into the corresponding hole and turn left to protect the ignition from dust and humidity.
e) “OPEN”: Guard open
Perform this operation, turning to the right, to open the lock and insert the key.