SILENCE S02 LS - Page 29

MU_S02 LS_EN - S02 LS User Manual (V002) Page 29 of 62 Copyright© SILENCE Urban Ecomobility
d) Headlight adjustment
To adjust the headlight, turn the
screw (1) behind it, using an 8 mm
ratchet wrench or a Phillips head
screwdriver.
ADJUSTING THE LIGHT BEAM POSITION
(UP)
To adjust the light beam position
upwards (high and low beam), turn
the screw clockwise (facing the
scooter headlight).
The screw is accessed from the two
openings on both sides of the front
fender. The adjustment screw is in a
place that is not easy to access; if
you cannot manage to adjust it
yourself, please take the scooter to
your nearest SILENCE Official Service
Centre.
ADJUSTING THE LIGHT BEAM POSITION
(DOWN)
To adjust the light beam position
downwards (high and low beam),
turn the screw counter-clockwise
(facing the scooter headlight).
2
1