ROLLING AND LIFTING THE MACHINE
RELEASING THE HANDLE
To release the handle from its
locked collapsed position, place the
palm of your hand in the lifting hole
and push the handle upward while
pressing the release button with
your thumb.
LIFTING THE MACHINE (BACK)
Note that the hand in this picture is
shown in the lifting point in the back
of the machine. By placing one
hand in the hole under the locked
handle, and the other hand in the
lifting hole in the front of the
machine, lifting can be done
efficiently.
LIFTING THE MACHINE (FRONT)
This picture shows the front lifting hole. To lift the
machine, grip the front of the machine with one hand and
the back of the machine (see explanation above) with the
other hand. Because the two lifting points are located
high on the machine, it is possible to lift the Silent Partner
without needing to “bear hug” the machine from
underneath.
READY TO ROLL
The machine is shown here ready to be rolled. Note that
the hopper is placed securely on top of the body of the
machine and the handle is fully extended.
To roll the machine, tilt the handle towards the back until
the rolling wheels are securely in contact with the ground.
You can now maneuver the machine effectively over a
variety of terrains. For maximum durability, it is best to lift
the machine when the path is very rough, such as over
gravel, potholes, or rough grass.
To Next Page
Loading...
