Silent Partner EDGE LITE User Manual

Owner’s Manual for the
EDGE: LITE, SPORT and STAR
www.sptennis.com
SAFETY FIRST
The Silent Partner ball machine is capable of throwing tennis balls at high speed. Take all
necessary precautions to prevent ejected balls from striking people.
Do not allow children to use the machine and keep them at a safe distance from it, and from ejected
balls, when on court.
Do not insert your hands or foreign objects into the openings of the machine while it is running. The
throwing wheels must never be touched when they are spinning.
Exercise caution when carrying the machine. Careless lifting can result in injury. The handle must
never be used alone to lift the machine, especially going up or down stairs. Use center opening in
front and rear to lift the machine.

Silent Partner EDGE LITE Specifications

General

Brand	Silent Partner
Model	EDGE LITE
Category	Sports & Outdoors
Language	English

Summary

Safety First

General Safety Precautions

Essential safety warnings and precautions for operating the ball machine to prevent injury from high-speed balls.

Control Panel Overview

Battery Charger Jack

Connection point for the smart battery charger; charging takes approximately 10 hours.

Speed Control

Adjusts ball ejection speed from soft toss to high speed drives using a knob.

Spin Control

Generates spin from slice to topspin by adjusting the relative speed of two propulsion wheels.

Feed Rate

Controls the interval between ball feeds, adjustable from full stop to one ball every two seconds.

Sweep Function

Enables machine oscillation for symmetrical court coverage by aligning with the court.

Reset Button

Resets sophisticated electronic circuitry; check for obstructions if it pops.

Throw Consistency

Notes that dead balls affect consistency; avoid mixing balls of different firmness.

Elevation Adjustment

Adjusting Ball Trajectory Height

Modifies ball trajectory height by repositioning a clamp along an arc cut into the machine body.

Throwing High Lobs

Achieved by placing the clamp at the extreme right and inclining the machine rearward.

Getting Ready to Play

Aligning the Oscillator

Ensures symmetrical swing by aligning the lower platter parallel to the baseline.

Installing the Hopper

Instructions for attaching the hopper securely with a pin to prevent jamming during play.

Rolling and Lifting the Machine

Releasing and Lifting the Handle

Procedure to release the handle from its collapsed position and lift it upward.

Lifting the Machine (Front & Back)

Describes using specific lifting points on the front and back for efficient carrying.

Rolling the Machine

Tilting the handle to engage wheels for maneuvering; caution on rough terrain.

Remote Control (Star Only)

Remote Control Operation

Details the two-function remote control for FEED and SWEEP, and troubleshooting remote issues.

Caring for Your Machine

Maintenance Procedures

Outlines preventative maintenance like cleaning, wheel care, and battery lifespan management.

Service and Repairs

Replacing the Battery (Lite Model)

Step-by-step guide to replace the battery on the LITE model without opening the machine.

Replacing the Battery (Sport/Star Models)

Notes that battery replacement for Sport/Star models requires visiting a website for procedures.

Accessing the Circuit Board

Instructions on how to remove the control panel to access the machine's electronics.

Troubleshooting Simple Problems

Common Issues and Solutions

Addresses common problems like short battery life, machine not running, and remote control failure.

Warranty Information

Product Warranty Details

Covers the one-year warranty for material and workmanship, exclusions, and service procedures.