Need help?Do you have a question about the Silva Windwatch and is the answer not in the manual?
General| Brand | Silva |
|---|---|
| Model | Windwatch |
| Category | Measuring Instruments |
| Language | English |
Instructions for turning the Windwatch on and off using the On/Off button.
Procedure to close the aperture for complete wind vane protection.
Labels for display, function button, and On/Off button/reset button.
Align the vane housing with the casing hole for accurate data.
How to hold the Windwatch for wind measurement and understand displayed values.
Cycle through speed units (knots, km/h, m/s, mph, Beaufort) using the function button.
Toggle between speed and temperature displays by holding the function button.
Understanding peak, average, and current wind speed displays and their adjustments.
Interpreting current temperature and windchill, noting calibration options.
Access program mode by holding the function button for 10 seconds with the device off.
Briefly press the function button to move between P1 to P5 functions.
Select and save desired speed units (kts, km/h, m/s, mph, Beaufort) or disable them.
Choose between peak value based on normal or maximum average.
Select calculation time for average speeds (5-40 seconds).
Set the interval time for peak value display (2-10 seconds).
Adjust temperature sensor calibration for deviations.
Instructions for opening the compartment, inserting the CR 2032 battery, and closing.
Details on resolution, units, speed/temperature ranges, accuracy, and battery life.
To Next Page
