Need help?Do you have a question about the Silva ADC Pro and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Data Logging | Yes |
| Interface | USB |
| Resolution | 0.1 hPa |
| Accuracy | ±1 hPa |
Describes the function and operation of the mode button for navigation and setting.
Explains the set button's use for selection, switching, and scrolling through options.
Details the reset button's functionality for lap times, zeroing, and scrolling settings.
Details the procedure for pointing the propeller and measuring wind speed.
Guide to configuring the wind speed alarm level and the time span for average calculations.
Describes how to enter the display for setting wind chill alarm and calibration.
Details the step-by-step process for configuring the wind chill alarm and temperature calibration.
Describes how to access the storm alarm setting display.
Outlines the steps for enabling or disabling the storm alarm function.
Details the procedure for calibrating the barometric pressure reading.
Explains how to set pressure offset to reference sea-level readings.
Explains the display showing ski run count and accumulated altitude changes.
Details the display showing current, maximum, and minimum altitude values.
Provides instructions on how to enable or disable the ski run tracking feature.
Guides users on resetting ski run records and accumulated altitude data.
Step-by-step instructions for resetting the recorded maximum and minimum altitude values.
Instructions on how to navigate to the various setting displays within Altimeter Mode.
Step-by-step guide to setting the altitude alarm level and its ON/OFF status.
Provides instructions for calibrating the altitude readings on the device.
Instructions for setting parameters related to air density calculation.
Outlines the device's capability to log sensor data, including time and date.
Instructions on enabling and using the automatic data logging feature with intervals.
Lists the configurable options for data logging, including deletion and PC synchronization.
Guides the user through selecting specific data log settings like deletion and intervals.
Explains the process of transferring logged data from the ADC to a computer.
Instructions on how to access and review previously logged data records.
Details how to navigate and select specific data records for review.
Explains how to view details of selected logged data, including sensor readings.
Provides accuracy, resolution, and unit details for wind speed measurements.
Details accuracy, resolution, and units for temperature readings.
To Next Page
