Silva ADC Pro User Manual

Data Log Function
!
!
!
!
The ADC is equipped with a function to log
the sensor functional mode data. These
data are the current wind speed, ambient
temperature, barometric pressure, relative
humidity and the altitude at the current
location.
This data also includes the time and date
that the logging was taken.
The ADC can log data automatically (log a
data at a preset interval) or manually.
For logging data automatically, check the
'Automatic Data Log' section below. For
logging data manually, check the previous
'Manual Data Log'.
1) The log memory can log up to 256 records
and 1980 data.
2) If log memory is full, a ' '
message will display for few seconds. Delete
some data, or transfer the data to PC if
necessary.
3) Always check the memory level before data
logging.
Note:
MEMORY FULL
Data Log Mode - Data Log Function16.0
Record and Data
Memory Full Display
MEMORY
FULL
record
Record
Data Log Display
Free Memory Display
data data data
The Elements of a Data
A
B
C
current
wind speed
ambient barometric
pressure
ambient
temperature
relative
humidity
altitude at the
current location
Record no. & Data no
Logging time & date

Silva ADC Pro Specifications

General

Brand	Silva
Model	ADC Pro
Category	Measuring Instruments
Language	English