Silva ADC Pro User Manual

14.4.0
Altitude Max-Min Display
Current Altitude
Minimum Altitude
Maximum Altitude
Note:
!
!
!
Current Altitude is reading that measured by
the air pressure at your current location.
Minimum Altitude is the accomplished
minimum altitude record. It will be
superseded if a lower altitude is
subsequently achieved.
Maximum Altitude is the accomplished
maximum altitude record. It will be
superseded if a higher altitude is
subsequently achieved.
! Altitude Max-Min Display includes three
different altitude readings: Current,
Minimum and Maximum Altitude.
!
!
!
During the first three minutes of Altitude Display,
the ADC needs one second to get a reading.
After the first three minutes of Altitude Display,
the ADC needs one minute to get a reading.
Reset the maximum or minimum altitude prior
to recording a new one, check the 'To Reset the
Maximum and Minimum Altitude' section below
to reset the respective reading.
Altimeter Mode - Altitude Max-Min Functions
Trail 1
Trail 1 at point A at point BTrail 2
This Product will display
Trail 2
200
300
400
500
altitude (m)
time
Highest point Highest point
Starting
point
(reset the max
& min altitude)
Maximum
Altitude
500 m 550 m 500 m 550 m*1
Minimum
Altitude
150 m 150 m 150 m*2200 m
Starting
point
End
point
End
point
Lowest
point
Lowest
point
Note:
1. The maximum altitude will be updated as a higher
altitude (550m > 500m) is reached.
2. The minimum altitude will NOT be updated as there is
NO further lower altitude (150m < 200m) accomplished.
AB

Silva ADC Pro Specifications

General

Brand	Silva
Model	ADC Pro
Category	Measuring Instruments
Language	English