Silva ADC Pro User Manual

Altimeter Mode Setting
To Select the Setting Display
!
!
!
!
The following functions can be performed in
the Altimeter Setting Mode.
1) Altitude Alarm Settings,
a) ON or OFF
b) Target Altitude Level for alarm
2) Altitude Calibration ,
3) Relative Air Density Setting
a) Temperature
b) Pressure
c) Humidity.
o select the setting display, press and hold
the [mode] button for about 2 seconds
(altitude digits will start flashing).
In the setting display, press the [mode]
button to select between the Altitude Alarm
Setting, Altitude Calibration Display and
Relative Air Density Setting following the
adjacent diagram.
Check the 'Altitude Alarm Setting', 'Altitude
Calibration' and 'Relative Air Density
Setting' sections below for more detail on
the above settings.
Altimeter Mode - Altitude Mode Setting14.7.0
Altitmeter Mode
Altimeter Mode Setting Sequence
[mode]
[mode][mode]
Altitude
Calibration
Display
Relative Air Density Setting
Altitude
Alarm
Setting
hold
[mode]
hold
[mode]
ALTITUDE m
734 80
144
temperaturepressure
Relative
Humidity
[mode][mode]

Silva ADC Pro Specifications

General

Brand	Silva
Model	ADC Pro
Category	Measuring Instruments
Language	English