EasyManua.ls Logo

Silvan Selecta WP12-1 - Battery Charger Operation; Charger Details and Charging Procedure

Silvan Selecta WP12-1
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Battery Charger
Brand Name:
Silvan
Model No.:
HC211
Input:
240V, 50Hz, 0.164A
Output:
12.6VDC, 1.2A
Class II Symbol:
Symbol for Indoor Use Only:
Fuse Link:
T2A
Charger for 12.6V Lithium-Ion Battery Pack
Model No. YD-MT19H0125A
from Silvan Australia Pty Ltd only.
Before Charging Read Instructions.
Do not expose to rain.
CHARGING THE BATTERY
Note: The battery should be charged before
first use.
Plug the battery charger into a standard 240
Volt power point. The indicator light on the
charger will show GREEN.
Slide the battery pack into the charger. The
indicator light will show RED.
When the indicator light shows GREEN your
battery is fully charged.
Recharging time depends on the state of the
battery. A completely discharged battery takes
up to 6 hours to recharge.
After recharging for general safety reasons
turn off the charger, particularly in an
unattended area.
WARNING: Only intended to charge 12.6V
Lithium-Ion Battery Pack Model No. YD-
MT19H0125A from Silvan Australia Pty Ltd
having max. rated capacity 2500mAh.
CHARGER INDICATOR LIGHT
GREEN = Charger not connected to battery
RED = Battery Charging
GREEN = Battery Charged
Safety Instructions