Silver Cross 3D Pram System User Manual

12. USING YOUR RAINCOVER
16
Your 3D Pram System raincover is designed
to fit the 3D in either pram or pushchair
mode. The raincover however is not designed
to fit with Ventura Plus fitted to the 3D.
Loop the webbing at the front around the 3D
leg, just below the foot plate, and fasten.
Your raincover is now fitted.
To attach the raincover, first slide over the 3D
Pram System handles and pass over he hood.
Then fasten the velcro flap at the rear.
38
37
39

Silver Cross 3D Pram System Specifications

General

Brand	Silver Cross
Model	3D Pram System
Category	Stroller
Language	English