5
2. FOLDING YOUR LINEAR CHASSIS
Your Linear will fold easier if the swivel
wheels are locked and the brake applied first.
To fold your Linear chassis, locate the
folding catch (B) on either side of the chassis
just below the handle. Pull these upwards
towards you.
Note: It is recommended to always fold and
unfold with body detached.
Gently allow the handle to lower slightly,
whilst still holding it.
The top tubing section will release from the
lower section and raise upwards slightly.
Locate the safety handle (C) on the left hand
side of the chassis.
Whilst holding the chassis handle,
gently pull the safety handle downwards,
and towards you, releasing the secondary
safety catch.
8
7
9
B
B
C
To Next Page
Loading...
