Silver Cross Linear Chassis Instruction Manual

8
To engage the brake press down on either
pedal located on either side of the rear axle.
4. USING THE BRAKE
To disengage the brake, simply push the
brake pedal upwards, this will disengage
both sides simultaneously.
A ‘click’ will be heard as the brake engages.
NOTE: Always check that your brake is fully
engaged by gently rocking the pushchair.
17
16
18
Linear Pushchair 031204 13/5/05 7:18 am Page 8

Silver Cross Linear Chassis Specifications

General

Brand	Silver Cross
Model	Linear Chassis
Category	Accessories
Language	English