Silver Cross Motion User Manual

silvercrossbaby.com
ENG
FRA
SPA
ITA
DEU
SWE
FIN
RUS
ZH-S
ZH-T
ARA
11
Motion
360° i-Size Car Seat
WARNING  THIS IS ONLY A
LOADING POSITION
2.4 Press the button (8) again to place
the seat in the forward facing position.
It is important to check that the seat is
rmly locked into place.
STRAPPING THE CHILD INTO
THE SEAT
THIS CHILD RESTRAINT SYSTEM HAS A
LOADING POSITION MAKING IT EASY
TO PLACE THE CHILD IN THE SEAT AND
ADJUST THE STRAPS TO FIT CORRECTLY.
3.1 Turn the seat to the loading position
(2.2) and open the harness (5). Move the
harness straps to the sides to place the
child in the seat.
3.2 Place the straps over the child and
fasten the buckle.
3.3 To adjust the headrest (2) pull the
lever handle (1) on the top. It should be
set to the right position, this means that
the shoulder harness should come out
approximately 1 cm above the child’s
shoulders.
3.4 Tighten the harness by pulling the
strap (6), it should t the child snugly.
3.6 Once the child is securely strapped
in, you can recline the seat by pressing
the button (7) to the required position.

Silver Cross Motion Specifications

General

Installation	ISOFIX
Recline positions	Multiple recline positions
Safety standard	ECE R44/04
Side impact protection	Yes
Category	Car Seat
Brand	Silver Cross
Model	Motion
Safety Standards	ECE R44/04
Harness Type	5-point harness
Suitable for	Birth to approximately 4 years
Weight range	0-18 kg
Rotation	360-degree rotation
Compatibility	Compatible with ISOFIX vehicles