silvercrossbaby.com
ENG
FRA
SPA
ITA
DEU
SWE
FIN
RUS
ZH-S
ZH-T
ARA
15
Motion
360° i-Size Car Seat
DO NOT LEAVE UNSECURED
LUGGAGE OR OBJECTS ON THE
PARCEL SHELF IN THE VEHICLE,
BECAUSE IN THE EVENT OF
AN ACCIDENT THEY COULD
CAUSE SERIOUS INJURY TO THE
OCCUPANTS.
COVER THE SEAT IF IT IS LEFT IN
DIRECT SUNLIGHT. PLASTIC AND
METAL SURFACES GET VERY HOT
AND COULD BURN. THE CAR SEAT
COVER IS ALSO LIKELY TO FADE.
DO NOT PLACE THE FRONT
SUPPORT LEG ON A FLOOR
STORAGE COMPARTMENT LID.
THE FRONT SUPPORT LEG MUST
MAKE FULL AND FIRM CONTACT
WITH THE VEHICLE FLOOR.
MAINTENANCE
FITTING / REMOVING THE COVER
There are 2 fastening points for the cover
on the front. Unfasten these points and
gently pull the front part of the cover.
There are plastic parts on the sides of the
cover used to fasten it in place. Simply
pull gently to remove the cover. To t the
cover back on, follow the same steps in
reverse. Insert the side parts in the slot.
CLEANING
The seat cover is easily removable and
should be washed on a delicate cycle at
30 degrees using a mild detergent.
Take out all removeable internal plastic
/ foam parts from inside any fabrics
before washing.
To Next Page
Loading...
Need help?
General
