Get to know your
Simplicity Infant Carrier
Different handle positions
1 Make sure you understand the
different handle positions and
can correctly adjust the handle to
the required position.
A In car position
B Carrying and rocking position
C Helps access in and out
D Storage position (boxed)
E Stable position
Handle Operation
2 Push in and hold BOTH handle
release triggers located on the
sides of the handle. Move the
handle to the required position
making sure that both sides
click into position.
The head support
and lumbar wedge
The built in head support is designed
to give extra side protection and
support for your baby’s head and
will automatically re-position when
the harness is adjusted. The lumbar
wedge helps provide a more supportive
seating position especially for new and
premature babies.
The lumbar wedge can be removed
in the later stages of using the
Simplicity Infant Carrier. Silver Cross
always recommend that you use the
wedge for as long as possible.
1
2
6
A
B
C
D
E
To Next Page
Loading...
Need help?
General
