Silver Cross Simplicity User Manual

7
Fitting and using the
sun/wind canopy
3 Place the Simplicity Infant Carrier
on a level oor surface with the
handle positioned in the stable
position.
Remove your baby from the
Simplicity Infant Carrier.
To t the sun/wind canopy slide the
two plastic attachment arms (A) into
the holes located on either side of the
Simplicity Infant Carrier (B).
Make sure that both plastic
attachment arms are positioned and
locked correctly into the xing holes.
Make sure that the fabric of the
sun/wind canopy is positioned
around the back of the infant carrier
shell. Holding the rim of the sun/wind
canopy, gently pull the front frame of
the canopy forward to fully open.
4 To remove the sun/wind canopy,
press the release levers (C) on both
arms and remove
Fitting and using the apron
The apron is designed to be used when
the Simplicity Infant Carrier is attached
to the Silver Cross pushchair.
The apron can be tted by placing
it over the foot end of the Simplicity
Infant Carrier, gently pull into position
and secure using the Velcro tabs only
when not fitted in the vehicle.
The apron MUST NOT be used
when the Simplicity Infant Carrier
is fitted into the vehicle as the buckle
release button will be obscured.
3
4
A
C
B

Silver Cross Simplicity Specifications

General

Brand	Silver Cross
Model	Simplicity
Category	Baby Carrier
Language	English