DiscountRamps.com • 1-888-651-3431
Page 7Rev. 091218
Using Spring Pins with Anti-Rattle Tension
1. Pull both spring pins out and fold the ramp up to a folding position. After the outer folded ramp sec-
tion passes the outer pin, the ramp will be in the upright position. The inner pin stays compressed.
2. Pull the ramp handle towards your body to compress the lower anti-rattle tension springs.
3. The inner spring pin will then release, secur-
ing the ramp in place.
4. To release the ramp, pull on the inner pin and
pull the ramp handle simultaneously.
*Note: For added leverage,
pull at the top of the ramps
to compress springs
Anti-Rattle Tension Spring
To Next Page
Loading...
