15
ENGLISH
Congratulations! You have purchased a Silver Storm prod-
uct, one of a range of well-designed, sold and reliable elec-
trical tools for professional users who appreciate good qual-
ity, safety and reliability.
To get the most out of your new bayonet saw, please read
through these instructions and the attached safety instruc-
tions before use. Please save this user manual as you may
wish to refer to it at a later date.
A bayonet saw is ideal for fast, precision sawing where use
of an ordinary saw may be difficult. It can cut wood, metal
and plastic, and blade change is quick and easy without use
of a key.
Electronic speed regulation ensures that saw speed can be
set for a range of tasks, and operator comfort is ensured
thanks to the softgrip handle
Voltage: 230V ~ 50Hz
Power rating: 900W
Motor speed (free-running): 600-2,500 RPM
1. Saw blade
2. Soleplate
3. Blade holder
4. Support grip
5. Speed control button
6. Lock button
7. On/off button
• The saw’s metal parts may become conductive if the saw
comes into contact with a wire. Therefore only hold the
saw by the insulated handle.
• Never place the saw on a table or workbench if it has not
stopped completely. The saw blade will continue to run a
short time after the machine has been switched off.
• The saw blade must not be touching anything before you
start the saw.
• Never stop the saw blade by applying pressure to the saw
or to the side of the blade.
• Do not use cracked, blunt or damaged blades.
• Do not attempt to cut items thicker than the maximum
cutting depth of the blade, or where there is insufficient
space for the blade under the item.
• Check that the ventilation slots are not blocked.
• Always use a face mask if excessive amounts of dust are
generated or cutting harmful materials. Always read safety
instructions from the material manufacturer if supplied.
Special safety regulations
Introduction
Bayonet saw parts
Use
Technical specifications
Stroke length: 28mm
Capacity: metal 8 mm, wood 115 mm, PVC 30 mm
To Next Page
Loading...