17
ENGLISH
Sawing wood
Check that the item does not contain nails or other metal
objects.
Sawing metal
We recommend lubricating the material and saw blade with
cutting oil to protect the tool and avoid overheating. Support
the item with wooden blocks on either side.
Sawing plastic
Never cut using maximum speed.
Make a test cut first to check if the material can tolerate the
heat generated by sawing.
Maintenance
Check all the screws on the saw regularly, and tighten if ne-
cessary.
Check regularly that the carbon brushes are in a good condi-
tion. If they are worn down, they should be replaced.
Cleaning
Wipe the saw using a well-wrung cloth as required, and al-
ways keep the surface and ventilation holes free of dirt.
Never use corrosive or abrasive detergents, as they may at-
tack the plastic parts of the machine.
To Next Page
Loading...