Note: Significant wave height is a term used in boat design. In practice, significant
wave height means the average height of the highest third of all wave heights
measured in the waters. If the significant wave height is 2.0 m, the mean height
of all waves is roughly 1.2 m.
Maximum recommended load: See technical specifications
See also section 5.4 “Loading”.
Main dimensions and capacities: See technical specifications
Craft length, width, draught, total weight, etc., and tank capacities are shown in
the technical specifications.
Builder’s plate:
Part of the aforementioned information is given on the builder’s plate, which is
affixed next to the remote control. Supplementary information is provided in
the appropriate sections of this manual.
To Next Page
Loading...