Silver Viscount 9500e - Blind Hem and Lingerie Stitch; Sewing Blind Hems

1. Fold the fabric as illustrated with the
wrong side uppermost.
2. Place the fabric under the foot. Turn the
handwheel forwards by hand until the
needle swings fully to the left. It should
just pierce the fold of the fabric. If it does
not, adjust the stitch width accordingly.
3. Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
4. Sew slowly, guiding the fabric carefully
along the edge of the guide.
5. Turn over the fabric.
9 :
03:
04:
Blind hem/ lingerie for firm fabrics
Blind hem for stretch fabrics
Blind hem for stretch fabrics
1
5mm 5mm
Overcasting
stitches
35
Reverse
side
Reverse
side
BLIND HEM/ LINGERIE STITCH
BLIND HEM/ LINGERIE STITCH
a
b
3
5
F
2.5~4.0
1.0~2.0
2
4
Please Note: It takes practice to sew
blind hems. Always make a sewing
test first.
All manuals and user guides at all-guides.com