36
1. Select the pattern 25 from the Group
Patterns "A" to get the button sewing stitch.
Change the presser foot to the button
sewing foot.
2.5~4.5
BUTTON SEWING
BUTTON SEWING
1
2. Position the work under the foot. Place the
button in the desired position, lower the
foot.
3. Adjust the stitch width to "2.5-4.5" according
to the distance between the two holes of the
button.
6
2.5~4.5
3
4
4. Turn the handwheel to check that the
needle goes cleanly into the left and right
holes of the button.
5. Before sewing, press the Auto-lock button
to sew reinforcement stitches automatically
at the beginning and at the end of the stitch.
If a shank is required, place a darning
needle on top of the button and sew.
6. For buttons with 4 holes, sew through the
front two holes first, push work forward and
then sew through the back two holes.
To Next Page
Loading...
