To Next PageTo Next Page
Need help?Do you have a question about the Silvercrest 10-in-1 Remote Control and is the answer not in the manual?
General| Device Type | Universal Remote Control |
|---|---|
| Number of Devices Supported | 10 |
| Remote Control Type | Infrared (IR) |
| Supported Devices | TV, VCR, DVD |
| Battery Type | 2 x AAA (not included) |
Describes the intended use and supervision requirements for children.
Details on unpacking the remote and checking package contents.
Instructions for properly inserting batteries into the remote control.
Explains the different fields and symbols shown on the remote's LCD screen.
Controls the power on/off function.
Used to select the device to be controlled.
Accesses the SETUP menu and other functions.
Used for navigating menus and selections.
Moves backward in menus.
Changes the reception channel.
Activates saved command chains.
Used for entering codes and programme numbers.
Inputting programme numbers, including two-digit entries.
Buttons for operating teletext functions.
Controls playback functions for devices like DVD/VCR.
Switches to the AV input.
Toggles sound on/off.
Adjusts the volume level.
Accesses the controlled device's menu.
Confirms menu selections.
Accesses favourite stations or electronic programme guide.
Guides on programming the remote for various devices.
Methods for programming the remote control to operate devices.
Step-by-step guide to programming using brand codes.
Instructions for entering device codes manually.
Process for automatically searching for device codes.
How to set the current time on the remote control.
How to set the current date on the remote control.
Adjusting the contrast of the LCD display.
Setting the duration of LCD and button illumination.
Configuring global volume and mute control.
Blocking access to setup menus with a lock function.
Resets the remote control to factory default settings.
Setting up sleep and event timers.
Setting a timer to switch off the device after a set period.
Programming specific button sequences at designated times.
Teaching the remote to learn button signals from an original remote.
Learning individual button codes from another remote.
Clearing all learned button commands.
Step-by-step guide to programming a Macro sequence.
How to run a pre-programmed Macro.
Process for deleting all saved Macros.
Saving preferred TV channels as favourites.
How to recall saved favourite channels.
Deleting all saved favourite channels.
Adjusting volume and muting sound.
General instructions for operating the remote control.
Function to switch off all connected devices simultaneously.
Guidelines for cleaning and storing the remote control.
Troubleshooting steps when the remote does not react.
Resolving issues with commands being sent incorrectly.
Troubleshooting problems with changing channels on the device.
Addressing issues with specific buttons not working.
Troubleshooting when the remote stops reacting after a button press.
Steps to fix a blank LCD display on the remote.
Proper disposal methods for the remote control.
Proper disposal methods for batteries.
Specifications and technical details of the remote control.
Compliance information regarding EMC Directive.
Information about the importer of the device.
Details on warranty coverage and service contact information.
