6
SHSS 12 C2
GB
Before first use
NOTE
►
This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the first use.
■ Remove all packaging materials and protective
stickers from the appliance, especially the pro-
tective sticker on the contacts on the back of the
hand element .
■ Place the cradle on the stand so that the
cradle clicks into place.
Charging the appliance
NOTE
► Ensure that the appliance is switched off
before starting to charge the batteries.
■ To charge the appliance, connect the charger %
to a mains socket and insert the barrel jack +
into the charging socket / on the cradle .
Feed the cable through the cable channel on the
charging socket /, so that the cradle is not
resting on the cable.
■ Place the handle with the attached hand element
onto the cradle .
The red control lamp illuminates.
When the appliance is fully charged, the indicator
light illuminates green.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
Fig. 1 Fig. 2
■ To connect the hand element to the handle,
push the tip of the hand element into the
opening in the hand element recess !.
■ Then press the grip of the hand element
into the handle so that the hand element
clicks firmly into position (Fig. 1).
■ To remove the hand element from the handle,
press the “Hand element” release 3.
■ Then pull the hand element upwards and
forwards out of the hand element recess !
(Fig. 2).
To Next Page
Loading...
