Silvercrest 284982 - Hair Trimming Procedures; Trimming Hair

14 US-EN
Trimming hair
Note: The hair being trimmed should be clean,
dry and untangled.
Carefully comb the hair using the supplied
styling comb
17
to untangle any knots.
Place the cutting cape
15
around the neck
and nape to prevent hair clippings from falling
into the collar.
Begin by using the longer comb attachment
11
and trim the hair gradually to the desired length.
Note that the desired trim length can only be
achieved if the product is held perpendicularly
to the skin.
Avoid any sudden movements while trimming.
Switch the product on by sliding the ON / OFF
switch
3
to the "I" position. To maximize per-
formance, slide the ON / OFF switch
3
to the
"Turbo" position. The Turbo display
8
will
then light up.
Always trim from the nape toward the top of
the head, or from the forehead and temples
toward the crown of the head.
Move the product slowly and steadily through
the hair. If possible, trim against hair growth.
Hold the product so the comb attachment
11
is as level as possible.
Move the product over the head several times
to cover all of the hair. For an even cut, move
the product through the hair several times from
different directions.
Comb the hair repeatedly.
You can adjust the desired trim length of the
comb attachment
11
more accurately by rotat-
ing the lower part of the product
5
according
to the length position indicator
4
. These ad-
justments vary by ⅛ in / 0.3 mm.
Example:
Comb attachment ⅛ in / 3.0 mm
(trim length ⁵/₃₂–¹³/₆₄ in / 3.8–5 mm):
Far left position
(⅓₂ in / 0.8 mm): short hair
(⁵⁄₃₂ in / 3.8 mm)
Middle position
(₆ in / 1.4 mm): mid-length hair
(¹¹⁄₆₄ in / 4.4 mm)
Far right position
(₄ in / 2.0 mm): long hair
(¹³⁄₆₄ in / 5.0 mm)
Comb
attachment
(in / mm)
Trim
length
(in / mm)
Trim length with accurate trim adjustment (in / mm)
⅓₂
/ 0.8
³⁄₆₄ / 1.1 ₆ / 1.4 ₆ / 1.7 ₄ / 2.0
⅛ / 3.0
⁵⁄₃₂ / 3.8 ⁵⁄₃₂ / 4.1 ¹¹⁄₆₄ / 4.4 ³⁄₁₆ / 4.7 ¹³⁄₆₄ / 5.0
¼ / 6.0 ¹⁷⁄₆₄ / 6.8 ⁹⁄₃₂ / 7.1 ¹⁹⁄₆₄ / 7.4 ¹⁹⁄₆₄ / 7.7 ⁵⁄₁₆ / 8.0
⅜ / 9.0 ²⁵⁄₆₄ / 9.8 ²⁵⁄₆₄ /10.1 ¹³
/
₃₂ / 10.4 ²⁷⁄₆₄ / 10.7 ⁷⁄₁₆ / 11.0
½ / 12.0 ½ / 12.8 ³³⁄₆₄ / 13.1 ¹⁷
/
₃₂ / 13.4 ³⁵⁄₆₄ / 13.7 ³⁵⁄₆₄ / 14.0
¾ / 20.0 ¹
3
⁄₁₆ / 20.8 ⁵³⁄₆₄ / 21.1 ²⁷⁄₃₂ / 21.4 ⁵⁵⁄₆₄ / 21.7 ⁵⁵⁄₆₄ / 22.0
1 ³⁄₁₆ / 30.0 1
7
⁄₃₂ / 30.8 1 ⁷⁄₃₂ / 31.1 1
15
⁄₆₄ / 31.4 1 ¹⁄₄ / 31.7 1 ¹⁷⁄₆₄ / 32.0
Note: Be sure to move the product away from the
hairline and slowly move it downward.
Note: The scissors
18
supplied may be used for
additional styling.