What to do if my Silvercrest Iron leaves wet spots?
If your Silvercrest Iron is leaving wet areas on the fabric, it might be due to steam condensing on the ironing board. To fix this, first wipe the ironing board dry. Then, iron the wet areas of the fabric without using steam.
Why does water drip from my Silvercrest 290359?
If water drips out of the sole of your Silvercrest Iron, it could be due to a couple of reasons. If you've paused steam ironing briefly, the cooling steam might condense in the connecting hose; this is normal. Hold the iron over a collecting cloth or container and press the steam button until steam discharges instead of water, then continue ironing. Alternatively, the set temperature might be too low for steam ironing. In this case, set a temperature suitable for steam ironing.
Why is water dripping from my Silvercrest 290359?
If water drips from the sole of your Silvercrest Iron, it could be due to condensed steam in the connecting hose when steam ironing is paused. This is normal. Hold the iron over a collecting cloth or container and press the steam button until steam discharges instead of water, then continue ironing. Alternatively, the set temperature might be too low for steam ironing. In that case, set a temperature suitable for steam ironing.
How to fix a Silvercrest Iron that is not working?
If your Silvercrest Iron isn't working, first, make sure the plug is firmly inserted into the power socket to address any voltage supply errors. If it's still not working, ensure that you switch the appliance on using the On/Off button.
Why is water dripping from the soleplate of my Silvercrest 290359 Iron?
Dripping from the soleplate of your Silvercrest Iron can occur for two reasons: If you pause steam ironing, the cooling steam condenses in the hose, leading to drips - this is normal; hold the iron over a cloth or container and press the steam button until steam appears. Alternatively, the set temperature may be too low for steam ironing; in this case, set a temperature suitable for steam ironing.
Why does my Silvercrest 290359 leave wet areas on fabric?
Wet areas on fabric after ironing with your Silvercrest Iron can be due to steam condensing on the ironing board. Wipe the ironing board dry and then iron the wet areas on the fabric without using steam.
Why is my Silvercrest 290359 Iron not working?
If your Silvercrest Iron isn't working, it could be due to a voltage supply error. Ensure that the plug is firmly inserted into the power socket. Also, check if the iron is switched on using the On/Off button.
Why is my Silvercrest Iron leaving wet spots?
If wet areas occur on the goods being ironed when using your Silvercrest Iron, it may be caused by steam condensing on the ironing board. To resolve this, first wipe any wet areas off the ironing board, and then iron the wet areas on the fabric dry without steam.
Why does my Silvercrest Iron leave wet spots on my clothes?
If wet areas appear on your fabric while ironing with your Silvercrest Iron, it may be due to steam condensing on the ironing board. To resolve this, first wipe any wet areas off the ironing board. Then, iron the wet areas on the fabric dry without using steam.
How to fix Silvercrest 290359 when it doesn't produce steam?
If your Silvercrest Iron isn't producing enough steam, there might not be enough water in the water tank, so fill it with water. Also, the iron may not have heated up sufficiently; wait until the temperature indicator lamp goes out. Ensure the temperature control is set within the appropriate range, and if the steam unit hasn't been used for a while, press and hold the steam button until steam discharges from the sole of the iron.
General| Type | Steam Iron |
|---|---|
| Soleplate material | Ceramic |
| Anti-drip system | Yes |
| Self-cleaning function | Yes |
| Features | Vertical steam, Spray function |
To Next Page