To Next PageTo Next PageWhy is my Silvercrest SDB 2400 A1 not producing steam?
If your Silvercrest Iron is not producing steam, first, ensure the steam regulator is set to a higher position. Also, check if the water tank has enough water and refill it if needed. Finally, make sure the temperature regulator is set to at least level or higher, as a low temperature can prevent steam generation.
What to do if my Silvercrest SDB 2400 A1 Iron does not get hot?
If your Silvercrest Iron is not getting hot, make sure that the plug is inserted into a mains power socket and the temperature regulator is adjusted to the desired temperature level. If it's still not heating up, the iron may be defective, and you should arrange for it to be repaired by qualified specialists.
How to fix Silvercrest SDB 2400 A1 that is producing no steam?
If your Silvercrest Iron is producing no or very little steam, the water reserves in the steam iron are likely depleted. Refill the water tank with water.
What to do if my Silvercrest Iron does not turn on?
If your Silvercrest Iron isn't working and the "Power" light is off, make sure the plug is properly connected to a working mains power socket. If the issue persists, it could indicate damage to the appliance, and you should contact Customer Services.
Why is my Silvercrest SDB 2400 A1 Iron not working?
If your Silvercrest Iron isn't working, first ensure it's properly connected to a mains power socket. If it is and still not functioning, the appliance might be damaged, in which case you should contact Customer Services.
Instructions for filling the water tank.
Instructions for standard steam ironing.
How to clean the iron's internal system.
General| Power | 2400 W |
|---|---|
| Water tank capacity | 300 ml |
| Soleplate | Ceramic |
| Weight | 1.2 kg |
| Auto shut-off | Yes |
| Anti-drip system | Yes |
| Self-cleaning function | Yes |
| Steam output | 30 g/min |
