11
SDB 2400 A1
GB
IE
TIPS
The iron takes longer to cool down than to heat up. Therefore, fi rst iron ►
delicate fabrics at lower temperature settings.
With mixed fabrics, alway
s set the temperature for the more sensitive fi bre. ►
Adjust the steam regulator 3) 1 to
.
Select the best suitable temperature setting with the temperature regulator 4) 7.
The control lamp “Temperature” 4 glows.
When the set temperature has been reached, the control lamp “Tempera-5)
ture” 4 goes out. Wait until the control lamp “Temperature” 4 goes out.
NOTICE
To help with ironing severely wrinkled or very dry materials, you can dampen ►
them by using the fi ne water spray 2
button.
You can now start ironing.6)
Steam ironing
The temperature regulator 7 must be at least at level or higher.
Otherwise it cannot produce any steam.
Set the steam regulator 1) 1 to the desired steam setting.
Wait until the control lamp “Temperature” 2) 4 goes out.
You can now start ironing.3)
Ironing with steam blast
The steam blast is especially suitable for smoothing diffi cult to reach parts of a
garment.
The temperature regulator 7 must be in the red marked setting range
at the
least in order to produce a steam blast.
Slightly raise the steam iron..1)
Press the steam blast button 2)
3
To Next Page
Loading...
