SMZT 260 A1
■ 58
│
GB
│
MT
■ Remove the power plug from the socket.
■ Wipe the motor unit 1 with a moist cloth. If necessary, apply a mild washing-up
liquid to the cloth. Wipe off any washing-up liquid residues. Make sure the
mains adapter 1 has completely dried off before the next use.
■ Clean the bowl 8, the emulsifying disc 6, the blade holder 5 with blade 7,
the connecting piece 4 and the base 0 in warm water with a little mild
washing-up liquid. Rinse all the parts afterwards using fresh water and dry
them with a tea towel.
Alternatively, you can clean all of the parts apart from the motor unit 1 in the
dishwasher. If possible, place the parts in the top basket of the dishwasher.
Ensure that the parts cannot become jammed in any way.
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
The appliance is
not working.
The appliance is not connected to a
mains power socket.
Connect the appliance to a mains
power socket.
The appliance is damaged.
Contact the Customer Service
department.
A household fuse has blown.
Check the household fuses and
replace them if necessary.
The appliance is possibly defective.
Contact the Customer Service
department.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
Appendix
Disposal of the appliance
Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please comply with all applicable regulations. Please contact your
waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
To Next Page
Loading...
Need help?
General
