Silvercrest 349710 2007 - Adding Ingredients and Lowering Arm

38
GB
7. Place the mixing tool20/21/22 onto
the axle23 from below.
Ensure that the small metal pins on the
axle23 slot into the recesses in the mix-
ing tool20/21/22.
8. Figure A: press the mixing tool20/
21/22 upwards slightly and rotate it
anticlockwise until it stops.
Adding ingredients
• You can add ingredients into the mixing
bowl16 while the drive arm19 is lift-
ed up.
• During mixing, you can add ingredients
through the filling opening10 in the
splash guard18:
- Reduce the speed to 1 - 2.
- Open the flap of the filling open-
ing10.
- Add the ingredients.
- Close the flap of the filling open-
ing10 again.
Lowering the drive arm
DANGER of hand injuries by
crushing!
~ Never put your hands between the drive
arm and the housing. There is a risk of
injury from crushing when folding
down.
9. Press the unlock button11 and move
the drive arm19 all the way down. The
unlock button11 pops out again.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 42.
Turbo
1
0
2
3
4
5
6
__349710_711_Kuechenmaschine_B8.book Seite 38 Mittwoch, 20. Mai 2020 2:06 14