To Next PageTo Next PageWhat to do if my Silvercrest SSMP 900 A1 is leaking liquids?
If liquids are running out of your Silvercrest Mixer, it might be due to the quantity of ingredients in the blender jug being too large. Try reducing the amount of ingredients.
Why is my Silvercrest SSMP 900 A1 Mixer not working?
If your Silvercrest Mixer isn't functioning, verify that it's properly connected to the power supply. Also, check if the blender jug is correctly engaged. The overheating protection might have switched off the device, so check that as well.
What to do if my Silvercrest Mixer has no function?
If your Silvercrest Mixer isn't working, first ensure it's properly connected to the power supply. Then, check if the blender jug is correctly engaged. Also, the overheating protection might have turned the device off.
Why is my Silvercrest Mixer leaking?
If liquids are running out of your Silvercrest Mixer, it might be due to the quantity of ingredients in the blender jug being too large.
What to do if the blade of my Silvercrest Mixer isn't turning?
If the blade of your Silvercrest Mixer isn't turning or is turning with difficulty, immediately switch off the device and pull out the mains plug. Check the blender jug for any obstacles that might be blocking the blade.
General| Power | 900 W |
|---|---|
| Speed settings | 5 |
| Accessories | Dough hook, Beater, Whisk |
| Pulse function | Yes |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Stainless steel |
| Bowl capacity | 5 liters |
Warns about hazards related to children and the device, including suffocation risk.
Warns against using the device near water sources like bathtubs or showers.
Warns about sharp blades and the need to wait for them to stop before handling.
Advises against using the flat blade for liquids and blending hot ingredients.
Differentiates uses for the cross blade and flat blade assemblies.
Step-by-step instructions for filling the jug, attaching the blade, and blending.
Explains the auto-shutoff feature and how to cool down the device.
Steps to take when the device does not power on or operate.
Troubleshooting for issues where the blades are not spinning or spinning with difficulty.
