EasyManua.ls Logo

Silvercrest SSMP 900 A1 - Troubleshooting Common Issues; Device Not Functioning; Blade Rotation Problems; Liquid Leakage Issues

Silvercrest SSMP 900 A1
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
GB
8. Storage
DANGER for children!
~ Keep the device out of the reach of chil-
dren.
DANGER!
~ In order to avoid accidents, the mains
plug4 must never be connected to a
wall socket while in storage.
Figure E: wind the power cable4
around the cable spool3 at the under-
side of the device.
Select a location where neither high
temperatures nor moisture can affect the
device.
9. Disposal
The symbol showing a
wheelie bin crossed through
indicates that the product re-
quires separate refuse collec-
tion in the European Union.
This applies to the product
and all accessories marked with this symbol.
Products identified with this symbol may not
be discarded with normal household waste,
but must be taken to a collection point for re-
cycling electric and electronic appliances.
Recycling helps to reduce the consumption
of raw materials and protect the environ-
ment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
10. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair the
device yourself under any circum-
stances.
Fault
Possible causes /
Action
No function
Has the device been
connected to the pow-
er supply?
Check the connection.
Has the blender jug
5/6 been engaged
properly?
Has the overheating
protection switched off
the device? (see
“Overheating protec-
tion” on page 8)
Blade of the
blade assem-
bly7/8 not
turning or turn-
ing with diffi-
culty.
Switch off immediate-
ly, pull out mains
plug4 and check:
is there any obstacle in
the blender jug5/6?
Liquids are run-
ning out
Is the quantity of ingre-
dients filled into the
blender jug too large?
BB&3(B%ERRN6HLWH)UHLWDJ0lU]

Table of Contents

Related product manuals