SED 3.7 G3
GB
│
MT
│
81 ■
■ To thoroughly clean the epilator head 2 you can remove it
from the appliance:
― Press the two restraint fixtures 3 together and at the same
time pull the epilator head 2 upwards.
― Clean the epilator head 2 under running water and then allow
it to dry.
― Place the epilator head 2 back onto the appliance. The epila-
tor head 2 must audibly engage.
■ Clean the appliance housing and the mains power adapter 0
with a moist cloth. If required, use some mild detergent on the
cloth. Ensure that the appliance is completely dry before the
next use.
Storage
■ Always protect the epilator head 2 with the supplied
protective cap 1.
■ Store the appliance, the cleaning brush w and the mains
power adapter 0 in the storage pouch q.
■ Store the appliance at a dry and dustfree location.
IB_353054_SED3.7G3_LB5.indb 81 08.10.2020 13:27:21
To Next Page
