Silvercrest 359628 2101 - Inserting the Espresso Sieves in the Sieve Holder

GB
│
MT
│
45 ■SEMM 1470 A2
Inserting the espresso sieves in the sieve holder
1) Place the large s or the small espresso sieve d in the sieve holder p:
– Make sure that the small indentation on the large s or small espresso
sieve d lies on the indentation on the sieve holder p when you put it in.
– Then turn the large s or small espresso sieve d a little so that it cannot
fall out.
NOTE
► Do not remove the used espresso sieve s d until it has cooled down!
► To remove the espresso sieve s d from the sieve holder p turn the
espresso sieve s d until the indentation on the espresso sieve s d is
over the indentation on the sieve holder p. You can now remove the
espresso sieve s d.
IB_359628_SEMM1470A2_LB5.indb 45 06.07.2021 15:08:32