Silvercrest 367792 2101 - Technical Specifications

73
GB
16. Technical
specifications
Pressure indica-
tor19 does not
move down-
wards.
• Is the device still pres-
surised?
• Switch off device, al-
low to cool, check that
the sealing pressure
indicator19 is clean
and moves freely.
Lid5 will not
open.
• Is the device still pres-
surised? Then the lid5
cannot be opened
(safety mechanism).
• Is the pressure indica-
tor19 stuck?
Program does
not start.
• Is the lid5 not proper-
ly closed? Is steam es-
caping?
Lid is shown in
the display29
and an audio
signal sounds.
Is the lid5 not closed, or
not open in the case of
the searing program
(Sear/Sauté41)?
Error message
E3 appears in
the display29.
Overheating: allow the
device to cool down.
Check that there is
enough liquid in the
pot7. Start the process
again.
The dis-
play29 shows
another error
message (E and
a number).
Contact the Service Cen-
tre.
Fault
Possible causes /
Actions
Model: SSM 1000 A2
Mains voltage: 220 – 240 V
~
50 – 60 Hz
Protection
class: I
Power rating: 1000 W
Working
pressure: 70 kPa
Maximum
permitted
pressure: 120 kPa
Filling vol-
umes:
- min. 250 ml
-max 4 litres
- Rice / food
that expands:
max. 3 litres
__367792_2101_Schnellkochtopf_CY.book Seite 73 Mittwoch, 9. Juni 2021 10:18 10