■ 18
│
GB│IE SHBS 500 D4
Cleaning and maintenance
DANGER! RISK OF ELECTRIC SHOCK!
► Always switch the appliance off before cleaning and pull out the
mains plug.
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. These
could damage the outer surfaces of the appliance.
► Never immerse the appliance in water or other liquids.
Cleaning the appliance
1) Remove the comb attachment 0/q from the shaving head 1 (see
section Fitting/removing the comb attachments).
2) Rinse the comb attachment 0/q in water and allow it to dry com-
pletely before re-attaching it to the appliance.
3) Clean the housing and the attachments with a slightly damp cloth. For
stubborn soiling use a mild detergent on the cloth.
4) Dry all parts thoroughly before using the appliance again or storing it.
To Next Page
Loading...
