GB│IE
│
21 ■SHBS 500 D4
Troubleshooting
The following table will help you locate and correct any problems:
Fault Possible cause Remedy
The appliance
will not switch
on.
The battery is empty.
Connect the appliance
to a mains power socket
(see section Charging the
appliance).
The cutting blade
of the shaving
head 1 is
labouring/not
moving freely.
The shaving head 1
is dirty and/or the
cutting blade is not
sufficiently oiled.
Clean the shaving head
1 and oil the cutting
blade (see section Clean-
ing the shaving head
and oiling the cutting
blade).
NOTE
► If you cannot solve the problem with the solutions given above,
please
contact the Service Hotline
(see section Service) .
To Next Page
Loading...
