30 GB/IE
Button Function
‒ Press briefly during playback to decrease the volume,
one beep will sound when the minimum volume has
been reached.
‒ Press and hold the button until playback of the current
track jumps back to the beginning.
‒ Then the button must be released briefly and held
again.
‒ Previous title in the list will start.
NOTE: Depends on the playback Application
(App), skip to previous title operation may differ slightly.
NOTE: When you change the volume on the product the
volume on the playback device will also so change. This volume
synchronisation function depends on the operating system and the
brand of your playback device.
Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack
3
has a higher
priority over a Bluetooth
®
connection.
Once the AUX cable
15
is plugged into the AUX-in jack
3
,
the Bluetooth
®
wireless connection will be disconnected. Music
playback is now switched to AUX-in only and the LED
7
lights up
green.
If the product is off, press the
button
8
until the signal LED
7
lights up green and a signal tone sequence sounds.
Switch the playback device on and start playback.
Set the highest possible volume on the playback device. Then
adjust the volume with the +/- buttons
13
12
on the speaker.
Switching between AUX-in
and Bluetooth
®
connections
To resume music playback via Bluetooth
®
connection unplug the
AUX cable
15
from the AUX-in jack
3
. The product will then
search for the previously paired playback device (if any) and re-
establish the Bluetooth
®
connection automatically.
True Wireless Stereo TWS pairing
NOTE: This function is only available if two of these products have
been purchased and both have the same model number.
Turn on both products and make sure they are both not connected
to another device via Bluetooth
®
.
Press the
button
9
on one of the products which will then
by default set it as the “primary“ unit. A beep will sound. When
pairing between both products has been carried out successfully,
To Next Page
Loading...
