EasyManua.ls Logo

Silvercrest 416066 2210 - Operation; Chopping

Silvercrest 416066 2210
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMZ 260 J46 
GB
IE
WARNING! RISK OF INJURY!
Wait until the blade has stopped rotating before removing
the motor unit.
Never try to grasp the blade if it is still rotating!
Risk of injury!
WARNING! RISK OF FIRE!
Do not operate the device for longer than 30 seconds with
the blade or 1 minute with the whisk attachment. After-
wards, allow it to cool down.
CAUTION! APPLIANCE DAMAGE!
See the table on the recommended fill quantities in the
section "Chopping". Otherwise, there is a risk of
contamination due to leaking contents.
Do not clean the motor unit in the dishwasher, as this will
damage it.
Never fill the appliance with hot liquids! Otherwise the
appliance could be damaged!
Operation
Chopping
NOTE
Before first use, you must clean the appliance thoroughly as described in
the section on cleaning.
1) Place the bowl 6 on the stand 9.
2) Insert the blade holder 5 with the blade 7 onto the bearing 8.
3) Prepare the food by chopping larger pieces into pieces (approx. 2 cm) which
will fit better into the bowl 6.
4) Add the food to the bowl 6. Please note the following table: For optimum
results, we recommend the following maximum filling quantities:

Table of Contents

Related product manuals