EasyManua.ls Logo

Silvercrest 425056 2301 - Cleaning the Appliance; Cleaning Procedures and Precautions

Silvercrest 425056 2301
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
IE
 9
SSMS 600 E5
Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
Under no circumstances may the motor unit 4 be cleaned by immersing it in
water or holding it under running water.
NOTICE
The measuring beaker 8 and whisk 7 are dishwasher-safe.
WARNING! PROPERTY DAMAGE!
Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 6 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the hand blender 5, the whisk 7 and the measuring beaker with
combined lid/stand 8 thoroughly in washing-up water and then remove any
detergent residue with fresh water.
4) Dry everything well with a dish towel and ensure that the appliance is
completely dry before re-use.

Table of Contents

Related product manuals