Silvercrest 96247 - Functions; Error Analysis; Selecting the Temperature Unit; The Memory Function (Memory Mode)

111 GB
9. Press the “EAR” button
2
again to carry out further
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
3
and the “EAR”
button
2
repeatedly at the same time until the LC
display
4
again shows the room temperature, date
and time, as well as the
symbol (Illustration D).
2. You are now back in standard mode.

Functions / error analysis

Selecting the temperature unit
 Press and hold down the “EAR” button
2
and the
“FOREHEAD” button
3
at the same time until “°F”
appears behind the temperature display. Switching
from “°F” to “°C” is possible with the same procedure.

The memory function (memory mode)
 IMPORTANT!
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the
oldest measurement is always deleted from the memory.
Operation / Functions / error analysis
IB_96247_SSOT6B2_ES_PT_DE_GB_LB5.indd 111IB_96247_SSOT6B2_ES_PT_DE_GB_LB5.indd 111 19.11.13 16:4819.11.13 16:48