12
Setting up and connecting
USB Record Player KH 2430
GB
Disposal of packaging
The packaging protects the device from transpot damages. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces generated waste. Dispose of packaging material that is no longer needed
according to the regionally established regulations.
NOTE
If possible preserve the device's original packaging during the warranty ►
period so that, in the event of a warranty claim, you can package the
de
vice properly for return.
Requirements for the setup location
For safe and trouble free operation of the device the setup location must fulfi ll the
following provisions:
The device must be placed on a fi rm, fl at and level base. ■
Do not place the device in a hot, wet or very damp environment or in the vicinity ■
of fl ammable materials.
Do not r
emove the device's feet. Otherwise proper air circulation can not be ■
guaranteed.
The mains po
wer socket must be easily accessible so that the power cable can ■
be easily disconnected in an emergency.
The sur
face areas of furniture may possibly contain components that could aff ect ■
the device's rubber feet, softening them. If necessary place a base under the
de
vice's feet.
Operating temperature range: +5 to +40 °C ■
Humidity (no condensation): 5 - 90 % ■
To Next Page
Loading...
