Silvercrest KH 2430 - Service and Operation; Switching the Device on and Off; Starting the Audacity Programme; Starting Playback of Records

21
Service and operation
USB Record Player KH 2430
GB
Service and operation
In this chapter you will receive important information for the service and operation
of the device.
Switching the device on and off
To switch the device on activate the switch  POWER
6
.
To switch the device off activate the switch  POWER
6
again.
Starting the Audacity programme
You start the Audacity programme by double clicking on the programme icon 
on the desktop or by selecting the corresponding input from the start menu.
Starting playback of records
Open the dust cover  .
Place the record onto the turntable 
5
.
NOTE
For playing records with a large centre hole (Singles) you use the adapter ►
7
.
With the Turntable speed selection switch 
12
set the required speed.
Release the security lever 
10
from the pick-up arm
13
.
Move the pick-up arm lever 
11
to the rear position to raise the pick-up arm.
Swing the pick-up arm to the desired position. 
Move the pick-up arm lever 
11
to the forward position to lower the pick-up
arm and to place the needle
14
onto the record.
NOTE
After the end of the recording is reached the pick
-up arm will return auto- ►
matically to its starting position.