Silvercrest KH 2431 - USB and Memory Card Operation; Connecting USB and Memory Cards; Activating USB;Card Mode; Playback Control and Title Skip

79
Service and Operation
KH 2431
GB
MT
USB and Card operation
Connecting a USB data carrier
♦ Connect your USB device to the port .
Connecting a memory card
♦ Slide a memory card into the memory card slot with the labelling pointing
upwards.
Activating the operating mode
♦ Press repeatedly on the button FUNCTION until USB or CARD is indi-
cated on the display. In the display READING is indicated and the device
searches for MP3 or WMA fi les on the data carrier. After reading the data,
playback starts automatically.
NOTE
►
If no data carrier is connected, NO USB resp. NO CARD is indicated.
► If no MP3/WMA fi les are found on the data carrier NO FILE is indicated
on the display.
Interrupting playback or fi nishing it
♦ Press the button ▸II , to pause playback.
♦ To continue playback press the ▸II button once more.
♦ To stop playback press the button. The track number and directory
number are displayed on the display.
Title skip
♦ Press the button ▸▸I to select the next track.
During playback:
♦ Press the button I◂◂ once to skip to the beginning of the current track or
twice to select the previous track.
In stop mode:
♦ Press the button I◂◂ to select the previous track.
Buch_53140_LB5.indb 79 05.04.12 14:00