14
Setting up and connecting
Loudspeaker System KH 2525
GB
Connecting the transmission unit to an audio device
NOTICE
Pay attention to the audio device's operating instructions. ►
Audio device with cinch sockets
Plug the connection cable's
18
jackplug into the AUDIO IN
10
connection
on the transmission unit.
Plug both of the connection cable's
18
cinch plugs into the audio device's
audio output.
Audio device with jackplug connection
Plug the connection cable's
20
jackplug into the AUDIO IN
10
connection
on the transmission unit.
Plug the connection cable's
20
other jackplug into the audio device's audio
output. If necessary use the jackplug adapter
19
.
Inserting and connecting the rechargeable battery pack
in the speaker
NOTICE
When delivered the rechargeable battery packs are already inserted into ►
the battery compartment. You need only to connect the rechargeable
batter
y pack's connection cable to the speaker.
Release both of the battery compartment cover's
14
locking clips and remove
the battery compartment cover.
Connect the rechargeable battery pack's connection cable.
NOTICE
Make sure that the removal strap is placed under the rechargeable battery ►
pack in order to make removal of the rechargeable battery pack easier.
Put the batter
y compartment cover back on.
Set the switch
13
to position Charge, if you use the battery packages.
NOTICE
Each speaker can also be operated with 8 size AAA (LR03 - Mico) batteries/ ►
rechargeable batteries. They are not supplied.
Do not use depleted and ne
w batteries/rechargeable batteries together ►
and use only batteries/rechargeable batteries of the same type also make
sur
e that the polarity is correct.
Set the switch
13
to position Normal, if you use 8 batteries/cells of size
AAA (LR03 Micro).
KH2525_37971_LB4 indb Abs3 14 25 11 2009 14 15 16 Uhr
To Next Page
Loading...
