Silvercrest LT 1510 - Setting the Audio Language; Setting the Subtitle Language; Setting the Parental Control Rating

29
Signal Source “DTV” (Digital TV Reception)
EN
Setting the Audio Language
Some TV shows and movies are broadcast with several languages to choose from. You can set a
preferred audio language so you don’t have to select it each time again. If the audio language you
set under this function is not being broadcast, the programme’s default language will be used.
1. Open the “DTV” menu. To do this, press the MENU button (50) on the remote control, press
the  or  buttons (32) to navigate to the fourth option and press .
2. Press  or  (32) on the remote control to select the option “Advanced Setting” and press OK
to open the “DTV/Advanced Setting” submenu.
3. Press  or  (32) on the remote control to select “Audio” and press  or  (32) to select the
desired audio language.
Setting the Subtitle Language
Some TV shows and movies are broadcast with several subtitle languages to choose from. You
can set a preferred subtitle language so you don’t have to select it each time again. If the subtitle
language you set under this function is not being broadcast, the programme’s default language will
be used.
1. Open the “DTV” menu. To do this, press the MENU button (50) on the remote control, press
the  or  buttons (32) to navigate to the fourth option and press .
2. Press  or  (32) on the remote control to select the option “Advanced Setting” and press OK
to open the “DTV/Advanced Setting” submenu.
3. Press  or  (32) on the remote control to select “Subtitle” and press  or  (32) to select
the desired subtitle language.
Setting the Parental Control Rating
Some TV shows and movies are broadcast with a rating. If you have enabled your LT 1510 child
lock function and have set a rating, it is only possible to watch programmes that have a rating lower
than the one set. In order to watch a programme with a higher rating you must enter the password
(4-digit number code).
1. Open the “DTV” menu. To do this, press the MENU button (50) on the remote control, press
the  or  buttons (32) to navigate to the fourth option and press .
2. Press  or  (32) on the remote control to select the option “Advanced Setting” and press OK
to open the “DTV/Advanced Setting” submenu.
3. Press  or  (32) on the remote control to select “Rating” and press  (32).
A password query window will appear.
4. Enter you password (the default password is "0000").
5. Press the direction button  or  (32) to go to the right panel of the window.
6. Press  or  (32) on the remote control to select one of the following ratings: 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18. Select “Off” to disable the parental control function. Press
OK (32) to conrm your selection.