16 GB
Setting-up operation
the same time).
2. Use the ALL-ON / OFF button
3
to switch all radio-controlled
sockets on or off at the same
time.
Trouble-shooting
If the remote control does
not work, please check the
following points:
Prob-
lem
The operating indi-
cator
1
on the re-
mote control device
illuminates but
there is no reaction
Rem-
edy
· Check that the current
output from the bat-
tery is adequate. If
necessary insert a
new battery.
Prob-
lem
No indicator light
1
on remote con-
trol when pressing
“ON” or “OFF”
Rem-
edy
·
Check that the battery
has been put in cor-
rectly.
· Check if the battery has
good contact, if neces-
sary press down.
To Next Page
Loading...
